"TOWARDS SUSTAINABLE FUTURE"

XP-SR40

Standalone Proximity Access System (Supports up to 40 card users, cater for small to medium size requirement)

BenefitsFeaturesConfiguration DiagramDocumentationFAQ

No	Item	Features
1.	Simple Design	Easy to use Easy to maintain Easy to program
2.	Pin Only Access	Use 4 digits secret code to access Multiple sets of code Codes can be re-programmed easily
3.	Proximity Card Technology	Easy to use Reliable technology High durability Just touch the card to access
4.	Standalone Architecture	Easy to install No PC is required to operate LED and audio buzzer indication
5.	Reliable Technology	Designed with proven and reliable technology Built-in System Integrity Monitoring System for maximum reliability

No	Item	Features
1.	Standalone Operations	Yes
2.	Onboard Memory EEPROM	Yes
3.	Pin Access	No
4.	Card User Capacity	40
5.	Keypad	No
6.	Continuous Card Read when door is opened	Yes
7.	Onboard Buzzer	Yes
8.	Firmware Flash Memory	Yes
9.	Polarity Protection for Power Input	Yes
10.	LED Indication	Yes (Red & Green)
11.	Durable Epoxy Coated Keypad	No
12.	Power 12VDC	Yes (200mA)
13.	Dimension (H x W x D)	100mm x 53mm x 20mm
14.	Configurable Lock Release Time	No (Fixed to 10sec)
15.	Configurable Door Open Time	No (Fixed to 20sec)
16.	Controller/Reader Mode	No

* Specifications subject to change without prior notice

No	Documentation
1.	Product Brochure: XP-SR40

FAQ

1. I have purchased XP-SR40 and I need to...

To install the reader, follow the wiring connection diagram provided, see article ID: AA-00242

2. I have installed XP-SR40 at my site, but how do I configure the controller

To reset the controller to factory default setting (Coldstart), see article ID: AA-00241
To program Master Card, see article ID: AA-00245
To install, delete and clear all cards, see article ID: AA-00246

3. Troubleshooting Guide

The reader keeps on produced beeping sound when door is closed, see article ID: AA-00247
The reader keeps on produced beeping sound every 1 second, see article ID: AA-00251
EM lock does not release when exit button is pressed, see article ID: AA-00248
EM lock does not release after scan a user card which has been installed, see article ID: AA-00249
EM lock always in disengage/ release condition, see article ID: AA-00250
6. Can I create a copy/ duplicate the Master card? No, you can’t. The Master card only can be initialized once after the reader has been Coldstart. See article ID: AA-00245 to create a new Master card

PRODUCTS