Country Flag

"TOWARDS SUSTAINABLE FUTURE"

XP-SNET-E248 – 24 Supervised Input & 8 Relay Output Extension Board

Advanced Search Search the Knowledgebase
Category

XP-SNET-E248 – 24 Supervised Input & 8 Relay Output Extension Board

 

MicroEngine XP-SNET-E248 is a 24 supervised input points & 8 relay outputs extension board. It has 8 durable relays with LED indicator for each of the relay. It is designed for Door/Alarm Monitoring System and Panic Button System. It is controlled by a main controller according to the application being used.

  • Alarm Monitoring System
FeaturesConfiguration DiagramDocumentationFAQ
No Item Features
1. Supervised Input 24
Able to detect line being bypassed,
cut or triggered
2. Relay Output 8
Relay Rating : 1A
3. On Board Surge Suppressor Yes
4. Power Requirement 12V @ 2A
5. Communication to Base Board RS485
6. LED indicator Yes
7. Operating Temperature 10 °C to 50°C (Degree Celsius)
8. Dimension 270 mm x 130 mm x 25 mm (Board)

XP-SNET-E248_v2

No Documentation
1. PDF-IconDatasheet_2025: XP-SNET-E248

FAQ

1. I have purchased XP-M2300i and I need to…
  • To install the controller, follow the wiring connection diagram provided, see article ID: AA-00364
  • To configure the uplink connection, see article ID: AA-00216 if using network connection, or see article ID: AA-00320 if using RS485 connection.
2. I have installed XP-M2300i at my site, but how do I configure the controller
  • To reset the controller to factory default setting (Coldstart), see article ID: AA-00304
  • How to use Auto PIN only to access the door, see article ID: AA-00204
  • To configure car park application using XP-M2300i, see article ID: AA-00342
3. Troubleshooting Guide
  • Problem to set the address number for reader and controller, see article ID: AA-00332
  • What is the default IP address for the XP-M2300i controller, see article ID: AA-00336

 

Toilet Cubicle